|
Environmental Shrink Boots |
Polamco are an official UK distributor for HellermannTyton® Environmental Shrink Boots
 The use of Hellerman Tyton environmental shrink boots in conjunction with our specialist heat shrink tubing makes it easy to fabricate complete jacketed wire and cable harnessing and interconnection systems of the highest quality. Heat shrink shapes are available for the complete range of electrical and electronic harnessing applications. They can be sealed with special adhesives and encapsulants to ensure the proper degree of mechanical support, strain relief and environmental protection. Encapsulating the complete harnessing and interconnection system to the desired configuration is easily and neatly accomplished, with minimum weight and bulk.
When ordering environmental shrink boot shapes, it is necessary to give a complete part number to enable efficient processing of your order. Part numbers can be made up of the following typical components
|
Shrink Boot Shape
|
fits entry sizes |
recommended entry sizes
|
minimum cablejacket diameter
|
maximum cablejacket diameter
|
recovered bootlength +/-10% |
Comments |
| 120-41 |
03-05 |
03-04 |
3,0 |
10,7 |
38,0 |
|
| 152-42 |
03-10 |
05 |
6,0 |
24,0 |
38,0 |
Ideal when 154-42 is too long |
| 153-42 |
03-10 |
05-10 |
3,5 |
9,0 |
55,0 |
Ideal when cable jacket diameter is much smaller than the backshell entry size |
| 154-42 |
03-14 |
05-06 |
6,0 |
30,0 |
55,0 |
|
| 155-42 |
07-14 |
07-09 |
7,0 |
31,0 |
67,0 |
|
| 156-42 |
10-17 |
10-12 |
8,5 |
36,0 |
80,0 |
|
| 157-43 |
13-22 |
13-17 |
10,0 |
43,0 |
99,0 |
|
| 158-43 |
18-24 |
18-24 |
16,0 |
60,0 |
130,0 |
|
|
