Cable sealing spin-coupling backshell with resilient grommet that compresses and seals against the cable jacket when the rear nut is tightened. The grommet is housed in a counter bore within the backshell body for excellent immersion capability with an IP68 rating. May be specified with heavy duty strain relief or with plain nut and no strain relief.

Straight, 45° & 90° Backshell Options

Low profile grommet compression backshell. Often referred to as an ‘E’ nut, together with knurled keying for a bonding of a heat shrink boot or tubing..

Extended non enviromental backshell with strain relief clamp.

Straight, 45° & 90° Backshell Options

Lightweight backshell assembly providing location and fixture of cable-tie for strain relief.  Machined from solid in either straight or 90 degree form for maximum strength, durability and reliability.

Standard, open frame style, cable clamp strain relief backshell. Machined from solid in either straight or 90 degree form for maximum strength, durability and reliability. Shell size determines cable clamp size as standard, although alternatives may be specified on request.

Low profile standard, open frame style, cable clamp strain relief backshell. Machined from solid in either straight or 90 degree form for maximum strength, durability and reliability. Shell size determines cable clamp size as standard, although alternatives may be specified on request.

Standard backshell for heat shrink boot. Shell size determines cable entry diameter as standard, although alternatives may be specified on request. The integral groove and knurled rear provides secure location and sealing for lipped heat shrink boots to compliment sealed harness systems without overall screening.

Backshell without strain relief for use with circular connectors commonly referred to as a ‘E’ nut.

Fixed backshell for open wire bundles w/o strain relief